outdoor slate tiles sale house front wall tiles
Item No.：HAF19735C Size(mm)L*W*H：245*40*17 Seam (mm): 3 Material: Full body ceramics Water absorption: 0.5-3% Certification: ISO9001:2000, 3C Package info：80Pcs/Ctn, 19.5Kg/Ctn, 1.96Sq.mtr/Ctn, 93Pcs/Sq.mtr 27tons' Container info: 1385Ctns, 110800Pcs, 1085.84Sq.mtr Function： Acid-Resistant Antibacterial Firebrick Heat Insulation Wear-Resistant
House front wall tiles Matters needing attention when sticking
1, first wet the walls of the base surface with water, until the surface without water for adhesive construction.
2, in the specified time (according to the adhesive product requirements for the use of instructions) paste the stone, paste it to be slightly twisted and shake the stone up and down or gently tapping with a mallet, so that the stone and adhesive closely fit. (For wall coverings, the construction team can also fix the copper wire according to the design requirements)
3. Correct the seam between the horizontal and adjacent boards. Note that 2mm or more joints should be reserved between the stones.
4. Initially clean the dirt attached to the surface of the board. After 3 days of pasting the stone (according to the instructions for the use of special artificial stone adhesives), clean joints and caulking can be performed. When filling joints, special grout for artificial stone should be used. .
5, cleaning after caulking treatment (can not use acid and alkali cleaners, tile sealant recommended special artificial stone cleaning agent) attached to the surface of the filler material and dirt.
6. After the stone is laid, the film is torn open after acceptance and cleaning.
7, it is recommended not to use traditional stone wet hanging construction.
Looking forward to your inquiry for this outdoor slate tiles sale house front wall tiles